BS EN 511:2006 pdf free.Protective gloves against cold.
BS EN 511 The test shall be preferably carried out in this atmosphere. If the test is carried out under different climaticconditions then it should be started within 3 min of the time the samples were removed from the standardatmosphere.For protective gloves with a multi-layer construction the test shall be carried out on all layers simultaneously,even if these, when removed, are not connected to one another (see 5.5).
The test shall be carried out in accordance with Method A of EN ISO 7854:1997 at a test temperature of (-20±2)°℃ or an alternative temperature as specified by the glove’s manufacturer.The number of cycles shall be 10 000.
From each palm of a pair of protective gloves two samples shall be taken (four samples in total).
lf the direction of manufacture of the material is recognizable then one sample shall be so taken that thelongitudinal axis lies in the direction of the manufacture and one in the direction at right angles to it.
lf the direction of manufacture is not given and one cannot be established then the two samples are takenin two directions at right angles to one another.
The samples are taken without seams. lf this is not possible then the sample is taken in such a way thatthe seams lie, during the test, in the area of the clip and do not influence the bending.
The test shall be carried out according to the whole glove integrity test described in lSO 15383, with complete immersion of the glove up to the wrist line only.
The test shall be carried out in accordance with ISO 4675 with a test temperature of (-50 ±2) ℃.
From each palm and back of a pair of gloves a sample will be taken （four samples in total).
lf the direction of manufacture of the material is recognizable then one sample shall be taken so that thelongitudinal axis lies in the direction of manufacture and one in the direction at right angles to it.
lf the direction of manufacture is not given and one cannot be established then the two samples are takenin two directions at right angles to one another.BS EN 511 pdf download.