ASTM E570-20 is intended for use on tubular products having outside diameters from approximately 1/2 to 24 in. (12.7 to 610 mm) with wall thicknesses to 1/2 in. (12.7 mm). These techniques have been used for other sizes, however, and may be so specified upon contractual agreement between the purchaser and the supplier.
ASTM E570-20 does not establish acceptance criteria; they must be specified by the using parties.
Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
Referenced Documents
E543 Specification for Agencies Performing Nondestructive Testing
E1316 Terminology for Nondestructive Examinations
ASTM E570-20 outlines a procedure for examining ferromagnetic tubular products using the flux leakage method. If properly applied, this method is capable of detecting the presence and location of significant longitudinally or transversely oriented discontinuities, such as pits, scabs, slivers, gouges, roll-ins, laps, seams, cracks, holes, and improper welds in ferromagnetic tubes under inspection. In addition, the severity of a discontinuity may be estimated and a rejection level set with respect to the magnitude of the electromagnetic indication produced by the discontinuity.
Keywords:Crystal Structure And Defects,Discontinuities,Electromagnetic Test,Ferromagnetic Materials,Magnetic Materials,Seamless Pipes And Tubes,Seamless Steel Tubes,Steel,Welded Pipes And Tubes,Welded Steel Tubes
ASTM E570-20 pdf free download
ASTM E570-20 pdf free download
Note:
Can you help me share this website on your Facebook or others? Many thanks!