BS EN 10028-1:2007 pdf free.Flat products made ofsteels for pressure purposes—General requirements.
BS EN 10028-1 This European Standard specifies general technical delivery conditions for flat products for the construction ofpressure equipment.
The general technical delivery conditions in EN 10021 also apply.
NOTE Once this European Standard is published in the EU Offcial Journal (OJEU) under Directive 97/23/EC, presumption ofconformity to the Essential Safety Requirements (ESRs) of Directive 97/2B/EC is limited to technical data of materials in thisEuropean Standard (Part 1 and the other relevant part of the series) and does not presume adequacy of the material to aspecilfic item of equipment. Consequently, the assessment of the technical data stated in this material standard against thedesign requirements of this specific item of equipment to verify that the ESRs of Directive 97/23/EC are satisfied, needs to bedone.
The following referenced documents are indispensable for the application of this document.For dated references,only the edition cited applies. For undated references, the latest edition of the referenced document (including anyamendments) applies.
EN 10002-1:2001, Metallic materials —Tensile testing — Part 1: Method of test at ambient temperatureEN 10002-5:1991, Metallic materials —Tensile testing — Part 5: Method of testing at elevated temperaturesEN 10020:2000，Definition and classification of grades of steel.
EN 10021:2006, General technical delivery conditions for steel products.
EN 10028-2:2003, Flat products made of steels for pressure purposes — Part 2:Non-alloy and alloy steels withspecified elevated temperature properties.
EN 10028-3:2003, Flat products made of steels for pressure purposes —Part 3:Weldable fine grain steels,normalized.
EN 10028-4:2003,Flat products made of steels for pressure purposes — Part 4:Nickel alloy steels with specifiedlow temperature properties.
EN 10028-5:2003, Flat products made of steels for pressure purposes — Part 5:Weldable fine grain steels,thermomechanically rolled.
EN 10028-6:2003, Flat products made of steels for pressure purposes — Part 6: Weldable fine grain steels,quenched and tempered.
EN 10028-7:2007, Flat products made of steels for pressure purposes — Part 7: Stainless steelsEN 10029, Hot rolled plates 3 mm thick or above —Tolerances on dimensions, shape and massEN 10045-1:1990,Metallic materials – Charpy impact test — Part 1: Test method.
EN 10048,Hot rolled narrow steel strip – Tolerances on dimensions and shape.
EN 10051, Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels —Tolerances ondimensions and shape.
EN 10052:1993,Vocabulary of heat treatment terms for ferrous products.BS EN 10028-1 pdf download.