BS 7800:2006 pdf free.Automotive fuel – Highoctane (super) unleadedpetrol – Specification.
BS 7800 This British Standard specifies requirements for high octane superunleaded petrol for use in petrol engine vehicles designed to run onunleaded petrol. It is aimed at the petroleum fuels industry, includingretailers, manufacturers and suppliers. It is primarily intended to ensurecompliance at the retail pump.
NOTE Copies of the BS 2000 series of standards are available from theEnergy Institute (formerly the Institute of Petroleum),61 New CavendishStreet, London W1G 7AR.
The following referenced documents are indispensable for the application of this document. For dated references, only the editioncited applies. For undated references, the latest edition of the referenced document ( including any amendments) applies.
BS 2000-40 (BS EN ISO 7536), Methods of test for petroleum and itsproducts – Part 40: Petroleum products – Determination of oxcidation stability of gasoline -Induction period method.
BS 2000-123 (BS EN ISO 3405), Methods of test for petroleum and itsproducts – Petroleum products – Determination of distillation.characteristics at atmospheric pressure.
BS 2000-131 (BS EN ISO 6246), Methods of test for petroleum and itsproducts – Part 131 : Petroleum products – Gum content of light andmiddle distillate fuels – Jet evaporation method.
BS 2000-154 (BS EN ISO 2160),Petroleum products – Corrosivenessto copper – Copper strip test.
For the purposes of this British Standard sampling from retail sitepumps and commercial site fuel dispensers shall be carried out inaccordance with the relevant procedures of BS 2000-509.
NOTE Attention is drawn to The Dangerous Substances and Preparations(Safety) (Consolidation)(Amendment) Regulations 2002, The Classification,Packaging and Labelling of Dangerous Substances (Amendment) Regulations1990, and the European Agreement Concerning the International Carriage ofDangerous Goods by Road (ADR)2003,with reference to sampling cans.
Storage, labelling and transport of samplesSamples shall be kept out of direct heat, such as sunlight, although it isnot necessary to keep them refrigerated.
NOTE 1 If left in direct sunlight there is a danger that the cans willbecome pressurized through expansion of their contents. A sample shall be identified by adequate and appropriate details on asufficiently robust medium such that its integrity is maintained duringsubsequent transport and handling.
NOTE2 If required, the sample should be sealed and labelled to maintainthe legal integrity.
NOTE 3 Attention is also drawn to the European Agreement Concerning theInternational Carriage of Dangerous Goods by Road(ADR) 2005 and theCarriage of Dangerous Goods (Classification, Packaging and Use of
Transportable Pressure Receptacles) Regulations 2004 with reference to thelabelling and transport of samples.BS 7800 pdf download.