BS F 157:2006 pdf free.Properties of high tearstrength silicone rubbersheet, mouldings andextrusions – Specification.
BS F 157 This British Standard specifies requirements for silicone rubbermaterial with excellent ozone resistance properties intended for theproduction of items such as sheet, mouldings and certain extrusions foruse where high tear strength is of prime importance over a temperaturerange of -60C to 150 C1).
For applications in contact with air, the material may be suitable for useup to 250°C. However, considerable reduction in tear strength canoccur when these materials are exposed above 150 C for other thanshort periods of time.
NOTE 1 Materials and products manufactured from this material areunswitable for use in contact with petroleum based fuels, light mineral oilsand greases made from them and phosphate esters.
NOTE 2 Where prolonged contact with heavy mineral or di-ester basedliqwids are reqwired, use should be made of material conforming to therequirements of BS F153.
NOTE 3 Further information on the suitability of silicone rubber fordesign applications can be found in SBAC Technical SpecificationNo.97 [ 1 ].
NOTE 4 Marking BS F 157:2006 on or in relation to a product representsa manufacturer’s declaration of conformity, i.e. a claim by or on behalf ofthe manufacturer that the product meets the reqwirements of the standard.The accuracy of the claim is solely the claimant’s responsibility. Such adeclaration is not to be confused with third party certification of
conformity.
The following referenced documents are indispensable for the application of this document. For dated references, only the referencecited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
For the purposes of this British Standard,the following terms anddefinitions apply.
polymer material formed by joining together many (poly) individual units (mer)of one or more monomers.
vulcanization thermosetting reaction involving the use of heat and pressure, resultingin greatly increased strength and elasticity of rubber-like materials.
Material composition Silicone polymer shall consist of a homogeneous mix of recognizedrubber quality products suitably compounded and cured to meet therequirements of this specification. No reclaimed or ground vulcanizedwaste shall be used in the mix.BS F 157 pdf download.
BS F 157:2006 pdf free
Note:
Can you help me share this website on your Facebook or others? Many thanks!