BS EN 350:2016 pdf free.Durability of wood and woodbased products —Testing andclassification of the durabilityto biological agents of woodand wood-based materials.
BS EN 350 The following documents,in whole or in part, are normatively referenced in this document and areindispensable for its application.For dated references,only the edition cited applies. For undatedreferences, the latest edition of the referenced document (including any amendments) applies.
EN 20-1,Wood preservatives – Determination of the protective effectiveness against Lyctus Brunneus(Stephens) – Part 1: Application by surface treatment (laboratory method)
EN 46-1,Wood preservatives – Determination of the preventive action against recently hatched larvae ofHylotrupes bajulus (Linnaeus)- Part 1:Application by surface treatment (laboratory method)
EN 49-1, Wood preservatives – Determination of the protective effectiveness against Anobium punctatum(De Geer) by egg-laying and larval survival – Part 1: Application by surface treatment (Laboratorymethod)
EN 117,Wood preservatives – Determination of toxic values against Reticulitermes species(Europeantermites) (Laboratory method)
EN 252, Field test method for determining the relative protective effectiveness of a wood preservative inground contact
EN 275, Wood preservatives – Determination of the protective effectiveness against marine borers
ENV 12038,Durability of wood and wood-based products – Wood-based panels – Method of test fordetermining the resistance against wood-destroying basidiomycetes.
EN 13556, Round and sawn timber – Nomenclature of timbers used in Europe
CEN/TS 15083-1, Durability of wood and wood-based products – Determination of the natural durabilityof solid wood against wood-destroying fungi, test methods – Part 1: Basidiomycetes
CEN/TS 15083-2,Durability of wood and wood-based products – Determination of the natural durabilityof solid wood against wood-destroying fungi, test methods – Part 2:Soft rotting micro-fungi
EN 16449,Wood and wood-based products – Calculation of the biogenic carbon content of wood andconversion to carbon dioxide
ISO 13061-2，Physical and mechanical properties of wood— Test methods for small clear woodspecimens — Part 2: Determination of density for physical and mechanical tests.
For the purposes of this document, the following terms and definitions apply.
wood species:trade name according to EN 13556 which can on occasion include more than one botanical tree speciesNote 1 to entry: E.g.European oak which comprises both Quercus robur and Q.petraea.
pilot name for a wood species:result of a consensual choice due to practical considerations retaining the usual name under which thewood is the most widely commercialised, adopted either by the main exporting country or by the mainimporting country
Note 1 to entry: Pilot names are established since 1954 in the nomenclature of the ATIBT.
set:clearly identifiable collection of units of wood or wood-based products, originating from a commercialsupply of a defined origin (single or not) and likely comprising only some of the variability of the woodspecies or of the wood-based material
Note 1 to entry: E.g. wood species sourced from a restricted geographical area.BS EN 350 pdf download.