BS EN 12104:2018 pdf free.Resilient floor coverings – Corkfloor tiles – Specification.
BS EN 12104 This document specifies the requirements for cork floor coverings made from agglomeratedcomposition cork supplied in tile form which are designed to be used with a factory finish and/or an insitu finish.
Cork floor coverings can be covered with other complementary layers of decorative materials，e.g.decorative cork or wood veneers, with or without applied colours.
This document includes a classification system based on intensity of use which shows where cork floortiles should give satisfactory service (see EN ISO 10874). It also specifies requirements for marking,labelling and packing.
The following documents are referred to in the text in such a way that some or all of their contentconstitutes requirements of this document. For dated references,only the edition cited applies.Forundated references, the latest edition of the referenced document (including any amendments) applies.EN 424,Resilient floor coverings – Determination of the effect of simulated movement of a furniture legEN 425, Resilient and laminate floor coverings – Castor chair test
EN 12466,Resilient floor coverings – Vocabulary
EN 13329:2016+A1:2017, Laminate floor coverings – Elements with a surface layer based on aminoplasticthermosetting resins – Specifications, requirements and test methods
EN 14354:2017, Wood-based panels – Wood veneer floor coverings
EN ISO 10874,Resilient, textile and laminate floor coverings – Classification (ISo 10874)EN ISO 23997,Resilient floor coverings – Determination of mass per unit area (ISo 23997)
EN ISo 23999, Resilient floor coverings – Determination of dimensional stability and curling after exposureto heat (1so 23999)
EN ISO 24342,Resilient and textile floor-coverings – Determination of side length, edge, straightness andsquareness of tiles (1So 24342)
EN ISO 24343-1，Resilient and laminate floor coverings – Determination of indentation and residualindentation – Part 1: Residual indentation (iso 24343-1)
EN ISO 24346, Resilient floor coverings – Determination of overall thickness (1SO 24346)
Cork floor coverings described in this standard shall be classified as suitable for different levels ofintensity of use in accordance with the performance requirements specified in Table 2, when tested inaccordance with the test methods stated therein.
Classification shall conform to the system specified in EN ISO 10874.
Cork floor coverings that conform to the requirements of this standard shall be clearly and indeliblymarked by the manufacturer either in their package or on an adhesive label with the followinginformation:
a) number and the year of this document, i.e.EN 12104:2018;
b) manufacturer’s and/or or supplier’s identification;
c) product name including the finishing and batch number (possibly in code form);BS EN 12104 pdf download.